WHOLESAFE J.S.Langen Agencies                                     Foxton - New Zealand 6 Main Street, PO Box 40, Foxton 5555 Ph +64 6 363 7311  or  0800 526436 Fax +64 6 363 6948   email John Langen- Managing Director  Importers and Wholesale Distributors  of Industrial Safety Equipment. Also visit our a'Court Database Listing

Blue Eagle Hard hats, bump caps, full-face protection, shields and brow guards, fall arrest belts,  welding protection, helmets and shields, Respirator masks, Safety spectacles, Hearing protection, earmuffs, earplugs, Gloves: leather, textile, latex, nitrile rubber, welding PVC.	EP Masks, disposable (maintenance free) respirators and masks, high visibility vests.	Elvex Hearing protection, head & hearing protection combinations for forestry & industrial use Earplugs and gel pods. Sound levels and  required hearing protection
Iles Optical Protective glasses, over-spectacles, face shields, prescription service.	Prescription service	Kasco full face and helmet type respiratory protection, air purifying and air supplied.

Blue Eagle Hard hats, bump caps, fall arrest belts, full-face protection, shields and brow guards, welding protection, helmets and shields, Respirator masks, Safety spectacles, Hearing protection, earmuffs, earplugs, Gloves: leather, textile, latex, nitrile rubber, welding PVC.   Top row: welding helmets and welding hand shields with lens size 51x108mm, fully assembled. P=polyprop, N=Nylon, F=fibre-reinforced, A=Assembled Bottom row right: lens size 82x108mm. Also available: leather welding hood, hood shoulders, welders leather cap, proban welders cap, leather cap with nape and more. Rainbow mask, self darkening welding helmet. Darkens automatically when the light gets bright. - fast switching: 1/35000 sec - simple design easy to use and adjust - large viewing area - solar powered cell with 2 independent sensors - total UV and IR protection at all times - darkening from shade 2.5 to 9-13 - adjustable darkness shade 9-13 M1 chin strap M2 head band assembly HC32 hard hat available in the colours: red, orange, blue, white, yellow, green Complying with NZS-5806(1987), EN-397(1995). Also available: BP61 bump caps to protect against minor scalp abrasion and to absorb minor bump hazards. Available in the same colour range. BVC-6 Blue Eagle browguard/visor/chinguard - high impact protection from all sides - polycarbonate clear or shade 3 visor - high impact ABS brow guard & chinguard - light weight - simple Snap-On design - adjustable head gear and lift-up B-6 browguard, V-2 visor, C-2 chin guard Fall-arrest belts (NP747 shown) NP737 safety belt. one forged double lock hook, 2 D-rings, one buckle. width 60mm. Belt and rope made of nylon fabric. NP727 safety belt. One double-lock hook, one D-ring, one buckle. Width 50mm. Belt and rope made of nylon fabric. NP727D safety belt. As above but two D-rings NP727H safety belt. As above, one D-ring. NP727HD safety belt.As above, two D-rings. NP747 (shown) linemen's safety belt. One adjustable fall arrestor, one double-lock hook, two D-rings, one buckle. Main belt width 50mm. Pad belt width 80mm. Rope diameter 16mm. Belt and rope made of nylon fabric. Leather qualities and types Full cowhide: the strongest, most supple type of cowhide leather. Split cowhide A-grade: the best quality suede type leather, strong but not as supple as full cowhide. Split cowhide B-grade: medium quality suede type leather. Full pigskin: the most supple type of glove leather available. More comfortable than full cowhide but not as strong. Split pigskin: suede finish pigskin leather for extra comfort. Drivers gloves C-183 top quality cow hide leather, strong, supple. Keystone thumb. Sizes M,L. CS-181 top quality cow hide leather, palm and thumb. Pigskin back for flexibility. Wing thumb style. Sizes M,L. SY-181 A-grade split cowhide leather. Strong and economical. Sizes M, L P-181 Pigskin drivers glove. Very supple, very comfortable. Size L PS-181 Pigskin palm and thumb, split pigskin back for comfort. Size L General handyman's gloves C-603NAR work glove. A-grade split leather, green leather reinforced palm and thumb for heavy duty applications. Rubberized cuff. Size L C-603GY grey leather palm and knuckle bar. Rubberised cuff, extra strong calico material. A-grade leather. Size L C-603NA A-grade leather handyman work glove. Pasted cuff. Size L C-603N B-grade leather work glove. Medium quality leather, pasted cuff. Size L C-601A A-grade leather palm, calico back without knuckle bar. Knitted elastic cuff. Size L PC-801 (not shown) pigskin palm, split cowhide back, acrylic fleecy lined glove. Warm & comfortable. Size L Cotton gloves CG-227 cotton fabric glove with PVC dots on palm, fingers and thumb. Size L CG-128 cotton/polyester knitted glove or glove liner. Sizes M,L CG-138 cotton/polyester knitted glove with PVC dots on palm and fingers for extra grip. Sizes M,L Latex disposable gloves Uses mainly for hygiene applications. Available in  626 single latex glove, sizes S,M,L 627 box of 100 gloves, sizes S,M,L L-HG latex rubber flock lined household gloves, suitable for many light duties. Sizes M, L, XL. Suggested use with cotton glove liners, e.g. CG-12S PVC gloves Suitable for a wide range of chemical handlingg applications. Not MEK, methanol, nitric acids, trichloroethylene! PV-220 40cm long gauntlet glove, size L PV-217 25cm long cotton knit stretch cuff, size L PV-218 27 cm long glove, size L All-rounder L-210 a fully washable knitted glove with a heavy latex rubber coating on palm and fingers. Extremely hard wearing, suitable for rough handling concrete, steel, etc. Sizes M,L Nitrile rubber gloves Good chemical and puncture resistance, hard wearing NBR-05 fully coated jersey lined glove with rubberised cuff, size L NBR-06 palm and fingers coated, open back, light interlock lining with stretch cuff, size L NBR-06J as above but with a heavier jersey lining, stretch cuff, size L Welders gloves W-1500 black fully lined welders glove, yellow welted seams, 35 cm long, size L W-1501 A-grade split leather fully lined welders glove. Reinforced palm and thumb. Size L 372L as for 1501 but left hand only, sold per pair, size L W-1502 kevlar sewn, fully lined blue welders glove. Reinforced palm and knuckles. Size L W-1508 full cowhide welders glove, split cowhide cuff, unlined. Size L W-Tig pigskin welders glove, split pigskin cuff, unlined. Size L Air-supplied masks and filters NP22, NP22A masks and filters are interchangeable. Suitable only for non-toxic applications! The carbon filters will remove odours as well as dust particles. The plain filters are for dust only. NP22A carbon filter mask with filters F3A NP22 dust mask with filters F2. Chemical respirator NP305 chemical respirator, single cartridge, twin exhaust valves. Not recommended for industrial use because the single cartridge increases inhalation resistance. NP306 twin cartridge respirator, tested to AS/NZS 1716 standard. Not suitable for asbestos! RC201 dusts and metallic fumes. Not suitable for asbestos. RC202 organic vapours, mists and gases. AS/NZS 1716 class AUS. Minimum required breakthrough time 20 mins (actually 65 mins). RC203 organic vapours, mists and gases. AS/NZS 1716 Class A-1. Minimum breakthrough 80 mins. (Actual 90 mins). Active carbon has smaller particle size than RC202. Recommended for highly volatile solvents: paints, lacquers, sprays. RC206 for acid gases and chemicals such as: sulphur dioxide, hydrochloric acid, chlorine, phosgene, nitrogen oxide, hydrogen fluoride, hydrogen cyanide, mustard gas, teargas and all other known war gases. PF6 polyester filter cloth prefilter discs. Prevents paint particles and other non-absorbable materials from blocking the activated carbon pores, thus maintaining and prolonging chemical cartridge effectiveness. NP312 chemical hood, consisting of a twin cartridge respirator and a light weight hood. To protect head, face, eyes and lungs against dust, paints, solvents, etc. NP316 dust hood made of non-woven fabric, extremely light weight, to protect hair, head and face against dusts. NP503 air supplied sandblast hood for all sandblasting operations. Air regulator provides smooth and low noise air flow. NP505 air-supplied spray painting hood, light weight, replaceable visor. Air regulator provide smooth and low noise air flow. NP375 air-supplied mask, consisting of a half mask, waist belt, air regulator and quick connector. The air diffuser under the chin balances the air flow in the mask. NP300 sanitary cap liner, can be fitted with all kinds of hard caps. For visitors' use. Important! These respirators are not designed for use in situations where contaminants in the atmosphere are an immediate danger to life or health or where there is a deficiency of oxygen. It is of utmost importance to replace cartridges when due and to check the functioning of the valves and cartridge seals. Blue Eagle safety spectacles These are made to our specifications by Sun May Industrial Co Ltd. They fully comply with the requirements of either AS/NZS 1337, 1992 for low and medium protection and/or ANSI Z-87.1 as marked on spectacle frames. The range and choice is so large that we invite you to ask for a detailed brochure.  Blue Eagle golf spectacles SM1910 - latest fashion design - sturdy light weight frame - adjustable side arms - hardened scratch resistant polycarbonate lenses - clear anti-fog, smoke, blue and yellow mirror SH-6 Utility are for medium impact use, approved to AS/NZ standard 1337. These are both functional and popular. UA-07 S5 Engineer, Shade 5 welding green. Approved to AS/NZ standard 1337. These spectacles are functional and independent of fashion trends. SM-9312 (UA-6) Duralite in Clear, grey, mirror. Approved to AS/NZ 1337 standard for medium impact. Functional and not subject to fashion trends. UA-88P Multifit, tints as shown and also in mirror. A very popular style for medium impact, approved to AS/NZ standard 1337. UA-30 Sportspec. Our most popular fashion style for medium impact. Approved to AS/NZ standard 1337. GC-303 Aviator with side shields and B-2230 Aviator without side shields. Approved to ANSI.287.1 (USA standard). Practical and favoured by veterans. UA-01 clip-on shields in the colours shown. Not according to standard specifications but very practical on spectacles designed to other protection standards. Particularly handy to convert your prescription spectacles and to protect them.

Elephant Prince have over twenty years of experience making filter masks that meet the highest quality standards. Filters are available in thick non-woven material and as active carbon.     Items shown left to right and top to bottom. EP-101 Non-toxic masks, box of 50 EP-101 Non-toxic mask, single pack DM-13A pack of ten EP-101 masks DM-13B blister pack of ten EP-101 EP-301B P1 dusts and mists, box of 20 EP-301 P1 Dusts and mists, single pack DM-311 blister pack of ten EP-301 EP-501B P1 Dusts & mists with active carbon for use with odours and solvents, box of 20 EP-501 P1 Active carbon mask, single pack Items shown from left to right and top to bottom: EP-505B P1 Dusts & Mists with active carbon layer and exhalation valve, box of 12 EP-505 as above, single item DM-312B P2 Dusts & mists with exhalation valve, box of 12 EP-321 as above, single item DM-321 blister pack of three EP-321 masks EP-301-P2B Dusts and mists, box of 20 EP-301-P2 as above, single item DM-311 blister pack of three EP-301 Eagle Eye Day or night high visibility vest with zip fastener Eagle Eye Mesh fabric daytime only high visibility vest with velcro fasteners.

Elvex Corporation is a safety equipment manufacturer committed to provide te best possible head, face, hearing and eye protection equipment. We like our products to be attractive too so that it is a pleasure to wear them.	ProGuard CU-25 economy four point suspension safety cap with a 24 dB ear muff, visor bracket and nylon screen.	ProGuard CU-60 top of the line for the professional: a Bullard six point suspension safety cap that gives an extremely secure fit, and HM-60 medium size 27dB ear muffs.	BrushGuard hearing/ face combo HB-7000 Combination of 23-26dB ear muffs and nylon mesh face guard outdoor power equipment, such as line trimmers, power blowers and lawn mowers. These nylon mesh face shields are not to be considered as eye protection according to ANSI Z87.1 and separate eye protection may be required.	Elvex ValueMuff HB-25 Most outdoor power equipment make noise. A quality 25 dB earmuff at a bargain price will be useful in many situations.
High performance ear muffs HB-2000 Equalisear and HB-5000 Super-sonic Our Supersonic ear muff offers the highest noise reduction rating of 29 dB whereas the HB-2000 protects with 26 dB.	Relax FM radio ear muff. In some work environments the radio would just add to the noise problem. The Relax ear muffs provide 82dB music inside 25 dB ear muffs. A great solution for the landscaping industry.	Elvex Blue, Ear Plugs Combine high level of comfort, ease of insertion and excellent 29 dB noise reduction. Plugs made of slow compression foam, have a smooth surface while expanding slowly. 200 pairs per box.	Banded Gelpods and GelCaps The best of both worlds of ear plugs and ear muffs. Light to wear, won't get lost easily, can be carried around the neck while not in use. 18dB for GelPods and 23 dB for GelCaps.

 

HEARING PROTECTION This chart shows the noise levels of familiar sounds and what would happen without protection. Your ears are more sensitive than you would suspect and can easily be damaged for life. For each 20 units of dBA (deci-Bell Attenuation), the sound level increases ten-fold; sound energy a hundred-fold.    Sound level dBA Example of noise Effect on hearing Protection needed 150 Explosion Instantaneous damage Seek expert advice 140 Rifle shot Damage over a brief period of time Grade 5 130 Jet taking off Threshold of pain Grade 5 120 Power saw, chain saw Damage after approx 30 sec Grade 4/5 110 Pneumatic drill,    Grade 4/5 100 Noisy lawn mower Some damage after appr 30 min Grade 3/4 earmuffs   90 Heavy truck Damage after 2 hours Grade 1/2 earmuffs   80   Below 85 dBA,  work day of 8 hours No protection needed   70 Street traffic   No protection needed

 

Iles Optical have a proud history stretching back over 50 years as a manufacturer of high quality eye and face protection. Iles Optical make advanced and stylish safety glasses. Their highly successful patented wishbone sidearm mechanism makes sidearm length and angle adjustable to provide maximum fact fit and protection. The PIONEER 2000 range gives twin lens styling whereas the PIONEER 3000 range has clear high impact resistant polycarbonate one piece lenses. The VISION range is extremely light and VISION OVERSPEC can be worn over existing spectacles.

Pioneer 2000 stylish lightweight stylish lightweight twin lens side arms adjustable brow & cheek guard protection sculptured side shields raised nose bridge reduces lens abrasion CE approved to EN166 lens material: toughened glass clear polycarbonate green anti-glare polycarbonate clear scratch-resistand polyc. green anti-glare scratch resistant p.c. Frame colours: black amber blue metallic blue metallic silver Pioneer 3000 Stylish one piece lens Maximum protection sidearm adjustment: length & angle positive arm lock position no metal parts brow & cheek protection universal nosebridge range of lens tint colours optional scratch-resistant coating CE approved to EN166 lens material combinations: clear polycarbonate antiglare green, grey, sodium scratch resistant coating Arm colours: black  metallic bluemetallic silver ocean green navy emerald green light blue mauve red yellow maroon Extremely lightweight one piece polycarbonate lens modern lightweight design one piece lens design choice of lens material integral lens sideshield adjustable side arms brow & cheek guard Lens options: clear scratch-resistant polycarb. clear non-mist combined coated pc. Frame colours: emerald green turquoise mauve redyellow metallic blue light blue pinkorange VISION OVERSPEC extremely lighweight one piece lens over spectacles worn over (large) spectacles side arms fully adjustable modern lightweight one piece polycarbonate lens brow protection choice of lens material Lens material combinations: clear coated scratch resistant pc 3 IR/UV shade 5 IR/UV shade Side arm colours: emerald green turquoise mauve redyellow metallic blue light blue pinkorange AVENGER modular face shield  +browguard +chinguard +tilt mechanism modular design,  quick release of parts comfortable forehead band visor recess prevents splash chinguard for impact & splash  screen & chinguard can be tilted balanced pivot mechanism adjustable nape harness ergonomic one hand adjustment Helmet attachments: add a face guard to your own helmet. Fits all standard AVENGER screens Screen types: Polycarbonate grade 1 (clear + non-mist + hard coated + green antiglare or gold anitglare) Acetate grade 2 (chemical resistant but low impact) (clear + non-mist + various lengths) Tritherm high temperature (clear or green or bi-coloured) Gold coated stops radiant heat  Prescription service Our range of protective glasses covers a wide range of types, styles and materials. Lenses can be fitted made of polycarbonate, CR39 plastic, toughened glass or photochromic glass. There are five ways bi-focal lenses can be made. The Respirator Spec has very thin flexible wire temple arms so that they can be worn under a full face mask. We can provide the prescription lenses your eyes need. First have your eyes tested by your optometrist and obtain a prescription for the corrective lenses. Send the details to us, together with your choice of frame. We will quote a price. If you are ordering direct from us, include your payment (or pay by credit card). Your eye protection is only one call away, or e-mail us now.

Kasco VENUS full-face masks, the result of the most advanced technology. The range of VENUS masks consists of modular components that can be combined: - A well sealing full-face mask - mask-worn blower M3 - waist-carried blower T5 - waist-carried blower T8 - compressed air pressure reducer AL - 6V 6Ah waist belted battery pack - battery charger Features: - light weight: only 600 grams - versatile: one size fits all faces - modular: components can be combined - comfortable: 5-point strap harness - easy breathing: large air passages - safe: small dead space in inner mask - won't itch: EPDM or silicone material - simple: no special tools needed - clear: central speech diaphragm - standard: according to EN148/1 & 148/3 Technical data Model Standard Temp deg C Airflow l/min Runtime hr Application VENUS EN136 -20+100 - - Economy, light duty VENUS-M3 EN147/CFR42 -10+70 >120  >8 Maximum freedom of movement Medium to heavy duty work VENUS-T5 EN147/CFR42 -10+70 >200 >5 Heavy duty tasks of limited duration VENUS-T8 EN147/CFR42 -10+70 >160 >8 Heavy shift work, variable filters VENUS-AL EN139/CFR42 -20+100 >120 - Economic with compressed air The Kasco Prof-88 helmet is made of a composite fibre resin, with built-in electronic components and ventilators. Call us for more details.

-- back to top --Home | Product | Brand | Business Type | Company | Company Web Pages